Locate the Cajun IP address

[telecomPA]

hi, does anyone know how to locate the IP address for a Cajun Switch just off of the PBX? is this even possible? i know you can list IPSI's and CLAN's and Medpro's or node-names, but how do you find out the IP address for a Cajun Switch?

 

[tlpeter]

I think just by logging in on the switch (console) and do a show config

ACS - Implement IP Office
ACA - Implement IP Telephony -- ACA - Design IP Telephony
ACA - Voice Services Management
______________
Women and cats can do as they please and men and dogs should relax and get used to the idea!

 

[letman2]

pingall from the web interface

 

[telecomPA]

thanks. how do i console to my PBX?

 

[eatlog]

You need a console cable connected to your serial port. Then use hyperterminal. This is similar to cisco products.

 

[telecomPA]

thanks, but i'm in PA and the PBX is in Canada. they don't make cables that long.

 

[SF0751]

You should be able to telnet to the remote PBX if you know the PBX IP address.

Susan
“Before you criticize someone, you should walk a mile in their shoes.
Then, when you criticize them, you are a mile away ...
and you have their shoes.”

 

[march70]

If the Cajun switch's IP addressed have been configure when the CM server is configured (via Web Maintenance Interface), then you can find the Cajun's IP address by using "pingall -a" command in the linux shell or select "Ping" option from the Web Maintenance Interface.