loading firmware on 1140e and 1120e

[gman1234]

I had posted a query earlier. I understand that it is possible to point the set at a TFTP server...running on laptop or PC.....The firmware file is placed in it...the set pulls the file. Can anyone assit me with thge procedure?

 

[pluff]

- Install TFTP Server
- Config the data directory (program specific but most have a default)
- Put firmware into directory above
- run or start TFTP Server
- Manually program phone TFTP option to be address of server above (make sure the phone and pc are on the same subnet)
- reboot phone
- magic happens (magic is dependent on your IT team....)
- firmware is updated

 

[jtimolien]

Hello I have done the mute, up, down, up, down, mute, 9, goodbye to enter in the admin pwr(color*set) and now I am at the screen that displays:

EAP Mode: Disabled

ID1:

ID2:

Password: ****

Enable VPN:

Protocol : Avaya VPN
... etc.

I would like to know what is the next step for updating firmware using a tftp server that I installed on my PC (Solarwinds). Can anyone help please (if anyone has done this can you explain the step by step process?)