loadhosts command doesn't load nodes

[adige2005]

NNM 6.2 on a Solaris 2.8.
I execute a loadhosts command and apparently it works correctly, but when I run an "ovtopodump" command, I don't find the loaded node.
See the following commands:

step 1: node in dns

root@srvgs01:/tmp/cisiamo# nslookup gs-mpls-iper-massa-r1.gs.it
Server: srvgs01.gs.it
Address: 10.10.11.2

Name: gs-mpls-iper-massa-r1.gs.it
Address: 192.168.193.13

step 2: loadhosts command apparently works correctly.

root@srvgs01:/tmp/cisiamo# loadhosts -v << EOF
> 192.168.193.13 gs-mpls-iper-massa-r1.gs.it
> EOF
1) Created gs-mpls-iper-massa-r1.gs.it (id = 103529)
1) Added 192.168.193.13 (id = 103530) to gs-mpls-iper-massa-r1.gs.it

1 new nodes added
1 new interfaces added


step 3: node doesn't appear in nnm db

root@srvgs01:/tmp/cisiamo# ovtopodump -RISC gs-mpls-iper-massa-r1.gs.it
OBJECT ID(S) OBJECT STATUS IP ADDRESS STATION
ERROR: Could not find object named gs-mpls-iper-massa-r1.gs.it.
root@srvgs01:/tmp/cisiamo# ovtopodump -RISC 192.168.193.13
OBJECT ID(S) OBJECT STATUS IP ADDRESS STATION
ERROR: Could not find object named 192.168.193.13.
root@srvgs01:/tmp/cisiamo# ovobjprint -o 103529

****** NO SUCH OBJECT ID ******

Of course, I run many time "ovtopofix -a" command, "ovw -mapcount -ruvD", "xnmsnmpconf -clearC", "ovstop -v" and "ovstart -v", and further I open many times map to let synchronization.

Any suggestion, please?
Thanks a lot

 

[tto002]

adige2005. try these steps:

# ovstop netmon
# loadhosts -m device's mask (255.255.255.0 for example)
ip-address FQDN-hostname
CTRL-C
#ovstart netmon

Go to NNM map and find this device by IP address or Hostname. Perform a demandpoll.

Hope this helps.