Bacardi412
Technical User
It says something about incorrect media but all trays and settings are set correctly. Can anyone shed some light on this issue. Any and all would be appreciated!
Bacardi
Bacardi
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
lj 4000-4050 41.3 error
- Thread starter Bacardi412
- Start date
- Status
1101001100110101
Technical User
May or may not help, but you can allways restore the factory settings and see if it fixes it. As you mentioned it has to do with there being a paper multifeed or the wrong size of paper is being used.
- Thread starter
- #3
Bacardi412
Technical User
Thanks for your input. We talked to HP and they say it is due to a faulty clutch on the tray 3 p/u assy and to also replace the paper feed rollers. Thanks,
Bacardi
Bacardi
- Status
Similar threads
