Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
List record in two column
- Thread starter mett
- Start date
Here is an excerpt from Microsoft's help:
On the File menu, click Page Setup.
In the Page Setup dialog box, click the Columns tab.
Under Grid Settings, in the Number Of Columns box, type the number of columns you want on each page.
In the Row Spacing box, type the amount of vertical space you want between each record in the detail section.
Note If you left space between the last control in the detail section and the bottom edge of the detail section, you can leave Row Spacing set to 0.
In the Column Spacing box, type the amount of space you want between the columns.
Under Column Size, type the width you want for a column in the Width box; for example, 3 inches. You can set the height of the detail section by typing a number in the Height box or by adjusting the height of the section in Design view.
Under Column Layout, click the Down, Then Across option or the Across, Then Down option.
Click the Page tab.
Under Orientation, click Portrait or Landscape.
Click OK.
This is the instructions for Access 2000.B-)
On the File menu, click Page Setup.
In the Page Setup dialog box, click the Columns tab.
Under Grid Settings, in the Number Of Columns box, type the number of columns you want on each page.
In the Row Spacing box, type the amount of vertical space you want between each record in the detail section.
Note If you left space between the last control in the detail section and the bottom edge of the detail section, you can leave Row Spacing set to 0.
In the Column Spacing box, type the amount of space you want between the columns.
Under Column Size, type the width you want for a column in the Width box; for example, 3 inches. You can set the height of the detail section by typing a number in the Height box or by adjusting the height of the section in Design view.
Under Column Layout, click the Down, Then Across option or the Across, Then Down option.
Click the Page tab.
Under Orientation, click Portrait or Landscape.
Click OK.
This is the instructions for Access 2000.B-)
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question
