Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

List all Tenants in CM 5.2

Status
Not open for further replies.

telecomPA

MIS
Jul 9, 2007
413
0
0
US
hello, is there a way to list every tenant so that i can see the music source being used? i have an S8700 PBX using CM 5.2 and i can't list the tenants. i have to go into each one and then look up the info. is there an export option of some sort or another way to view every Tenant?

right now i'm forced to display all 100 tenants one at a time.
 
In ASA, under Advanced, select the Report function.

In the command field copy and paste the following:

disp ten 1;disp ten 2;disp ten 3;disp ten 4;disp ten 5;disp ten 6;disp ten 7;disp ten 8;disp ten 9;disp ten 10;disp ten 11;disp ten 12;disp ten 13;disp ten 14;disp ten 15;disp ten 16;disp ten 17;disp ten 18;disp ten 19;disp ten 20;disp ten 21;disp ten 22;disp ten 23;disp ten 24;disp ten 25;disp ten 26;disp ten 27;disp ten 28;disp ten 29;disp ten 30;disp ten 31;disp ten 32;disp ten 33;disp ten 34;disp ten 35;disp ten 36;disp ten 37;disp ten 38;disp ten 39;disp ten 40;disp ten 41;disp ten 42;disp ten 43;disp ten 44;disp ten 45;disp ten 46;disp ten 47;disp ten 48;disp ten 49;disp ten 50;disp ten 51;disp ten 52;disp ten 53;disp ten 54;disp ten 55;disp ten 56;disp ten 57;disp ten 58;disp ten 59;disp ten 60;disp ten 61;disp ten 62;disp ten 63;disp ten 64;disp ten 65;disp ten 66;disp ten 67;disp ten 68;disp ten 69;disp ten 70;disp ten 71;disp ten 72;disp ten 73;disp ten 74;disp ten 75;disp ten 76;disp ten 77;disp ten 78;disp ten 79;disp ten 80;disp ten 81;disp ten 82;disp ten 83;disp ten 84;disp ten 85;disp ten 86;disp ten 87;disp ten 88;disp ten 89;disp ten 90;disp ten 91;disp ten 92;disp ten 93;disp ten 94;disp ten 95;disp ten 96;disp ten 97;disp ten 98;disp ten 99;disp ten 100;

Change the output to Export screen capture to file.

In the Export to file, change the file to save where you want it.

Click OK.

When the scheduler window appears, click OK again to run it.

It should take about 10 - 15 seconds for it to export all of the tenant information.

- Stinney

I love learning and passing on knowledge. "Because knowing is half the battle".... GI JOOOOOE!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top