systemengineer1972
Technical User
**Newbie Question**
How can I join two networks (128.0.0.0 to 10.0.0.0).. can this be done via a router/bridge
How can I join two networks (128.0.0.0 to 10.0.0.0).. can this be done via a router/bridge
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Linking two networks (128.0.0.0 to 10.0.0.0)
- Thread starter systemengineer1972
- Start date
- Status
- Thread starter
- #2
systemengineer1972
Technical User
And also the router is an Cisco 3640
That's what routers do. Just assign an IP address from each range to separate interfaces on the router (or the same one, if really necessary). Hosts on each network should point to the appropriate router address as their default gateway.
- Status
Similar threads
- Locked
- Question