Linking two BCMs together via T1?

[jamaster14]

We have a customer that has a BCM 400 and BCM50 and needs to link them together via T1. Is their a document somewhere that outlines what needs to be done to do this, and if so what is that document name(link?).

From what i read, it should be fairly straight forward?

thanks.

 

[telcodog]

BCM Networking Guide. Get it right off the BCM documentation page.

 

[jamaster14]

Thanks!

anything tricky i should look out for?

 

[jamaster14]

hmmm cant seem to find it. im on the avaya support docs page for the BCM50... is it under a different name? should i be under 200/400?

 

[telcodog]

Good luck finding documentation on that wbsite.

Log into a BCM, click on the Web Page button
And navigate to the documentation section. You'll find it there.

 

[oldestgeek]

Go to the documentation page by browsing to the IP address on your BCM. It is pretty straightforward.

 

[jamaster14]

thanks!

 

[norstarboy125]

If you can get a vpn set up between the 2 sites it would prob be alot cheaper using ip trunks versus the price of a T.

Jeremy J. Carter
Charm City Communications

http://www.charmcitycommunications.com

Norstar. BCM. CS1000 Programmer