Link to Nortel Switch

[seetu]

I have linked Definity G3 Si Rel 11 with Nortel switch using Q-sig. I get only the number display, not the name. Please any idea what could be the problem.
In the trunk group already , send name is y.

 

[1a22ip]

seetu

On the money page (system features customer options) on the QSIG optional features are the below set to Y?
Basic Call Setup? y
Basic Supplementary Services? y

I connect to an Alcatel and are getting both name and number

Hope this helps
ED


1a2 to ip I seen it all

 

[seetu]

Yes, all the features on page 7 qsig are set to y except centralized attendant.From the same switch I am linking to Siemens also with both the name and number display.

 

[bosing]

check also the system-parameter feature on QSig.

 

[seetu]

They are all set correctly as I am getting name from Siemens switch and the trunk group and signalling group are configured the same way.

 

[1a22ip]

seetu

I forgot to tell ya about the route you use to get the calls between the switches. I don't know about the Siemens but on the Avaya the route need to pass this info My routes look like this:

Pattern Number: 200

Grp. FRL NPA Pfx Hop Toll No. Del Inserted IXC
No. Mrk Lmt List Digits Digits
1: 7 0 2 user
2: 81 0 2 user
BCC VALUE TSC CA-TSC ITC BCIE Service/Feature BAND No. Numbering LAR
0 1 2 3 4 W Request Dgts Format
Subaddress
1: y y y y y n y as-needed bothept lev0-pvt none
2: y y y y y n y as-needed bothept lev0-pvt none
3: y y y y y n n rest none
4: y y y y y n n rest none
5: y y y y y n n rest none
6: y y y y y n n rest none

Trunks 7 and 81 are qsig trunks

Thanks
ED

1a2 to ip I seen it all