LINK MD110 BC8 AND AVAYA S8300

[Tier2_Maracaibo]

Boys and girl, I need a favor,
I am setting up a link between MD110 BC8 and Avaya S8300, 1 E1 (must be type tie) currently are MD-MD, but we will migrate one of the MD.
Parameters of MD are either difficult to understand and do not have staff on hand Ericsson tell us that we need to do. Someone I can indicate how this configuration can be done in the MD110 and AVAYA S8300?
Thanks

 

[TheCurious]

Hi Maracaibo,

Is your E1 Primary ISDN or E1 CAS ( R2 MFC signalling ) ?
If it is ISDN: do you have license for QSIG on S8300 ?
What software version is your S8300?
Can you give us printout from BC8, here are the commands:
CNBIP:LIM=x;
ROCAP:ROU=y;
RODAP:ROU=y;
RODDPEST=xyz;
ROEDP:ROU=y,TRU=ALL:

The Curious

 

[Tier2_Maracaibo]

Thanks for answering, E1 CAS is with MFC R2 signalling, as far as I understand, but also need to know the details of the trunk group, if type tie and what kind of signage at the trunk has MD.