Link IPO with Mitel 3300 via PRI card?

[rollymaster]

Hello everyone,

I have an IPO and a Mitel system side by side.

On my IPO i have a dual PRI card, the first one is use for the carrier and the other one we want to connect it direct to the Mitel thru is PRI card...

Can i usually do this? If so, how do i need to setup my PRI card on both side?

Regards

 

[omer99]

I don't know about the Mitel side but you have to configure your PRI as QSIG on the IPO

 

[pmcook]

Set both sides up as TIE. You'll need a crossover cable.

 

[amriddle01]

Probably better to use SIP really, you'll need an SCN licence to link up with IDSN so it'll be cheaper too

 

[rollymaster]

Finally it is working fine connected directly with a reverse cable! NI2 protocol on both side.