Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Link Down

Status
Not open for further replies.

techma1

Technical User
Aug 8, 2007
140
Four days back we started having this problem where in PMS link the physical link as well as protocol link were showing down resulting no communication link between EPABX & FCS Winsuite.

To test whether Attached data module has developed some problem we have interchanged the Data Module (7400B+) between CDR & PMS link and found the data module used for PMS earlier do work without any problem in CDR.

Today we changed entire PMS link on different already created data module (i..e. from 6950 to 6955). The cable between MDF & Wall Jack of PMS Module too changed with new cable. Now PMS physical link is showing as ‘UP’, however Protocol Link is still showing down.

Request kindly suggest the way through which we can make PROTOCOL link up for PMS
 
from a few days ago that I was presenting the same problem.
"Achievement solve it? What did you do?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top