Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

line on HP Color Laserjet 4005 / 4700 printout 1

Status
Not open for further replies.

irzyxel

MIS
Dec 17, 2002
138
DE
ive got a thin black line on the front and back of each printout.
what i dont understand is that its on the front and back, even then its a simplex print.
i tried replacing the fuser and transfer unit already without any luck.
 
Does the thin line appear vertical or horizontal on portrait ?
If vertical on portrait does the line only appear once pr. page on both sides ?
also ...
Verify the printer is clean inside, inspect for damaged rollers that could cause physical marks/lines on the paper.
Did you try with other media in the printer ?
1) Try to put the printer into diagnostic mode selecting "disable cartridge check".
2) Swap positions of the black and magenta toner cartrdige.
3) Try to print a few internal pages and verify if the streak is still black or has changed to magenta.
Please report back with your findings.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top