Line monitor 1

[Maverick8673]

In the BCM monitor I see that there is a line monitor, i can see this output in only one of my BCM's is there something that I need to set up to see this output in other monitoring sessions how is this done?

 

[biv343]

Are all your BCM's on the same software? I think 3.5 was the first release that the "line monitoring" worked on. If they are all on the same release, make sure that the line monitor server service is running on the BCM's that aren't kicking out any line monitor info.

 

[Maverick8673]

Thanks 3.0 does not have it but the 3.6's do appriciate the feed back

 

[acewarlock]

You can upgrade for free to 3.6

 

[Maverick8673]

how?

 

[acewarlock]

I just called my vendor and they sent me 15 2.5 to 3.0 upgrade kits and 35 3.0 to 3.6 upgrade kit's. now all 48 of my BCM's are at 3.6 and Clum patch 2.

 

[Maverick8673]

vendor sent them to you for free?

 

[acewarlock]

That is correct

 

[Maverick8673]

Nice guy, mine want to chager me $30 for the 3.6 upgrades

 

[acewarlock]

$30 is not a bad price, even though Nortel gives them to the vendor for free.

 

[Maverick8673]

If nortel is giving them away then my vendor should do the same, I will find them from another vendor I am sure, now that I know nortel gives them away.

 

[acewarlock]

upgrades to 3.6 were free but upgrade to 3.7 costs from $150 to $250 so I've heard.

 

[Maverick8673]

From my vendor try almost $700 due to the purchase of a new HDD, gees give me the software I can change out a hard drive lol.