Line issue

[ZboArmy]

I have a magix relase 3.0 at 2 sites, both can talk via p2pT and have central VM , all works fine, At main site i have additional DS1 card for the Pri coming in from cebyond on an iad router, Calls work fine except when you conference people in at either site, so senerio, user on call hits conf button then dials number hits conf user can hear both parties, but both parties can barely hear each other. anyone heard of this.

 

[392]

Check your switch identifiers under lines & trunks -> UDP. The value of the identifier provides specific gain qualities for the connection across the P2P. Switch identifiers 1-20 are for switches 200+ miles apart, 21-40 for closer than 200. For more info, consult the Merlin Legend Network Reference guide.

 

[ZboArmy]

this senerio exists at both sites, i don't see how adjusting gain for p2pt udp would effect main site, the only common factor to me is both sites use the 1 pri trunk to make and recieve calls, which is located at main site. Like i said before eveything works fine for ptp between sites, I will try gain but don't see how thayt will affect it. thanks