line isn't ringing

[ryan47]

On my MICS4.1 . One of my six lines is set to appear and ring, but it is only appearing. How do I make it ring??

 

[silver987]

Should ring. make sure the ringer is not turned to far down. F*80 for ring volume.

http://www.silverlakecom.com

 

[JohnjDefongi]

Or swap the line with one that works. If the problem follows the line (moves to the working line) then the problem is outside the system. If the problem stays on the original line you have a bad line card.

 

[HUCHIMAMA]

Also make sure DND on busy is set to "N" if your on the phone this will also make the next incoming call not ring at the set.

kgrant

 

[Roldan]

Also make sure that DND is not turned on, press Feature#85

Louie Roldan

http://www.4vertex.com

 

[ryan47]

Thanks for everyones help, but i was able to reroute my ccr tree in my CP 100 to better handle the situation of the call. thanks for the other tips it allowed me to view other senerios.