Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Line Group and Voice message

Status
Not open for further replies.

brizio71

IS-IT--Management
Nov 9, 2010
2
HU
Hi all,
I have a Unified Call Manager 4.3 installed and I have configured a Line Group with 4 members, this members are configured with all Hunt Option set to "Try next membre..." with a RNA Revision Timeout set to 15 seconds.

All works fine, now I wanna add the possibility, in case of all member are busy or not available, that the Caller listen a message and the drop the call.
Is it possible ?
Someone can help me and tell me what and how I have to configure this option ?
Thanks a lot

Fabrizio
 
Call Manager has no built in message playback.

If its just for one number I suggest you simply forward the group call onto another ext that has simple answer machine plugged into it via an ATA to achieve this.

Still its cheaper than buying a Voicemail server !

 
I have the Cisco Unified CallManager 4.3 with Voice Mail but i don't know how add a voice mail as last resource on line group.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top