LIM Viewer

[gcdhnjgfhfgsxh]

Hi

Need some help with the development of the program now...

I am trying to find a complete list of cards that are available for the MD110 both past and present and how many ports they have. For example ELU28 - DIGITAL - 16 ports. Basically im trying to find that type of information for Analogue extention cards, Digital Cards and all trunk cards both analogue and digital so that the program can calculate number of ports in the system.

Can anyone help

Thanks in advance



Dave

http://affy.dynu.net

 

[lancbomb]

ana cards elu 1 5 ports elu22 8 ports elu29 16 ports
line cards btu 1 2 ports tlu74 4 ports
if think of any other old cards ill post

 

[dognbone]

Hi
The 2 tables below show 1st the different types of boards and how many circuits they have and what their BRDID is. The second shows what each type of board can be used for (some boards can be used to do several things)


Table 1:

DEVICE BOARD BRDID NUMBER OF IND.
ALU1 19 1
ALU2 96 1
CDU1 22 16
CDU2+CDU3 22 16
CDU2+CDU4 22 16
CDU2+CDU5 22 16
DLU20 31 6/8
DLU30 31 6
ELU5 31 4/8
ELU7 2/44 *) 6
ELU11 2/44 *) 8
ELU24 2 7
ELU25 59 16
ELU26/2 70 8
ELU28 77 16/32
ELU29 87 16
ELU30 104 12
ELU31 108 6-8
ELU32-ROF 137 5416/2 113 2
ELU32-ROF 137 5428/1 114 8
FTU 20 16
FTU2 20 8
GJUL4 36 32
ICU 34 3
ICU2 34 3
IPU 69 8,16
LPU5 42 1-32
MFU 95 8
MPU 6 32
MRU1 24 4
MRU2 24 4
MSU 25 8
NIU 106 1-30
PGU2 35 1
SIU 29 2
SLU1 60 1
SPU2 (VCU2) 105 16/32
SPU2 (VMU) 112 16/32
TLU11 7 2
TLU20 27 30/32
TLU21 28 2
TLU23 26 3
TLU24 8 2
TLU25 32 2
TLU34 39 2
TLU35 39 2
TLU43 41 4
TLU44 51 4
TLU44/8 79 4
TLU50 48 30/32
TLU64/1 57 30/32
TLU64/2 48 30/32
TLU75 76 8
TLU76/1 57 30/32
TLU76/2 48 30/32
TLU76/3 27 30/32
TLU79 58 8
TLU80 99 4
TLU81 109 8
TMU/1 78 32
TMU/2 102 32
TRU3 49 16
TSU 14 -
TSUT 14 -
VCU2
VMU
VRU 67 8
VSU1 85 8/12
VSU2 85 8/12




Table 2:


VALUE BOARD FUNCTION

CTL, cordless telephone line
CTL ELU31
DL, data extension
DL1 ELU5 V.24, V.28 connection towards DCE-S and DCE-T.
ELU25 2B+D.
ELU28
DLU20 V.24-interface.
DLU30 X.21-interface (Eripax).
DL2 ELU5 V.24 connection towards modem.
EL, ITL, KL, extension line
EL6 ELU7 Extension lines, analogue.
ELU11
ELU24
ELU29
ELU30
EL7 TLU20 Extension lines, CAS.
TLU76/3
EL8 ELU25 Extension lines, 2B+D (POTS).
ELU28
ITL ELU26/2 ISDN, Standard ETSI.
KL1 ELU5 Extension lines, digital.
ELU25 Extension lines, 2B+D.
ELU28
IP, internet protocol extension
IPL ELU32
IV, integrated voice mail
IVL SPU2 (VMU)
MG, data for modem
MG1 ELU5 Connection of modems type ITU-T V.24.
OL, PABX Operator line
OL1 ELU5 PABX Operator lines, digital.
ELU28
PG, paging
PG1 TLU23 Paging, ESPA, E&M.
TLU80
PG2 PGU2 Paging, parallel-interface.
PG3 TLU11 Paging, loop.
TLU44
TLU44/8
TLU75
RA, recorded voice announcement
RA1 TLU23 E&M-signalling towards equipment for recorded announcement.
TLU80
VRU
VSU1
VSU2
TL, signalling, external lines
TL11 TLU11 Analogue exchange line, PSTN.
TLU44
TLU44/8
TLU75
TL12 TLU24 Analogue DID, PSTN.
TLU81
TL17 TLU21 Analogue tie line, loop signalling.
TL19 TLU23 Analogue tie line, discontinuous, E&M-sign.
TLU80
TL22 TLU23 Analogue tie line, continuous, E&M-sign.
TLU43 Analogue tie line, CEPT L1.
TLU80
TL25 TLU25 Analogue exchange line, LB-line signalling.
TLU75 Analogue exchange line, PSTN.

TL30 TLU20 Digital, PSTN.
TLU76/3
TL35 TLU34 Analogue tie line, balanced battery.
TLU35 Analogue exchange line, PSTN.
TLU75
TL37 TLU20 Digital tie line, CAS.
TLU76/3
TL50 TLU50 Digital tie line, DPNSS.
TLU64/2
TLU76/2
TL58 SLU1, TLU20 Analogue tie line, APNSS.
TLU21
TLU23
TLU43
TLU64/1
TLU76/1
TLU76/3
TLU80
SL60 TLU64/1 Digital, ISDN 30B+D.
TLU76/1
TLU79 2B+D.
SPU2 (VCU2) Is used for voice compression traffic, VCT and dynamic route allocation, DRA.
TL96 SPU2 (VCU2) Is used for voice compression traffic, VCT and dynamic route allocation, DRA




I hope this is what you required.

Good luck.

 

[GeoBr]

Maybe it will be better if the program read the "number of individuals" in the CNLIP and make same corrections.
For example, TLU76 is listed with 32 individuals but we can only use 30.

 

[gcdhnjgfhfgsxh]

Hi

Thanks for all of your help everyone. This info will help greatly and expect a new version of the program out within the next week. GeoBr... your suggestion is great and that is one of the methods the program will be using to calculate number of ports

Thanks

Dave

http://affy.dynu.net

 

[singhbrindisi]

Hi affy1977,

Delayed Response as i tried the s/w just now...

Small observations:

It didn't captured data about TLU75, analog trunks, even if i gets in Device board status as Active with 8 ports but in LIM details analog trunk ckts are 0.

One suggestion: If possible try to merge & compare data with SYECP...that way Total , used & balance ports will be identified too...may be a graphic representation will be possible too.....

Appreciate your efforts & volunteer service...

BR,

 

[slash50]

Dave my fruity friend, how you getting on man!!

 

[ICFUC]

There is a program written for this !
BoardId.exe

Where do I send it ?

 

[gcdhnjgfhfgsxh]

Hi

Sorry for the delay answering this post, havent been around for a while, as im prepairing for a new life in new zealand. However all of the suggestions are being noted and a new version will be released soon.

Any further suggestions can be forwarded to

affy1977@gmail.com

http://returntothemoon.org/rttm

http://returntothemoon.info/rttm

http://cod2info.net/cod2

Dave

http://affy.dynu.net