License the Hipath4000 V5 1

[ali-saleh]

When viewing the license for the PBX via the dis-codew command, the attached message appears

 

[ali-saleh]

The same fonts have been applied, but the problem is still there

 

[masviss]

https://www.tek-tips.com/viewthread.cfm?qid=1811115

 

[sbcsu]

Get a new codeword from the codeword tool.

Check and clean the SIM Card

 

[Moriendi]

You can see in the dis codew it can’t read the Hw ID of the sim card. I’d remove the adp, three rubs of the sim card on the jeans for luck, adp then makes a power on reload and if it still doesn’t work - Houston you have a problem. Faulty sim card is unusual but possible.

 

[ali-saleh]

I removed the card, cleaned it and rebooted again, but the problem still exists as shown in the attachment

 

[sbcsu]

Try replacing the Processor and/or the SIM card

SIM cards do go faulty

Processor should have a yellow strip on the side near the SIM card for your V5