Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

License error mode

Status
Not open for further replies.

telm59

Vendor
Aug 2, 2006
207
US
What happens when the 30 day grace period expires?
 
I think all that was set remain functional. But you do not have the ability to change or add. This is what happened with my AMM
Regards
 
Hardware platform? Definity / CM software version?

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

40 years Bell, AT&T, Lucent, Avaya
Tier 3 for 30 years and counting
[URL unfurl="true"]http://bshtele.com[/url]
 
Doesn't that happen when a system goes into survivable mode... meaning you get a license error on the remote CM, with a 30 day clock?
 
License errors can be caused for many reasons.

Can you go to linux bash and run these commands and post the output?
statuslicense -v
statuslicense -va AUDIX

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

40 years Bell, AT&T, Lucent, Avaya
Tier 3 for 30 years and counting
[URL unfurl="true"]http://bshtele.com[/url]
 
at the end of the 30 days you will not be able to perform administrative changes in ASA unless you perform a reset system 4 to restart the 30 days.
 
I had an S8400 that we could not login to using asa,telnet,putty or http. I have never seen a system actually pass the 30 days.
So I assumed it had gone into license error mode. The system was up and running, but had alarms on the server. We were reluctant to reboot the server without spare parts on hand.It crashed today, new 8400 is on the way.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top