LG LDK20 LCR help for Premicell instalation 2

[peachy7]

Hi Can any body help me please, a bit stuck with LCR setup.
I have looked at other treads but no joy.

4 Chanels BRI in group 1
1 Ana GSM in Group 8

All phones have access to 1 & 8

Tests ok with CO button on phone.

Set up required

Any one dialling 07 uses Grp 8, if busy then fallback
to Grp 1 (BRI).

Have admin tool, as cant get to grips with handset programming.

Have had a play with it, but not quite there so need help.

Many thanks

 

[EmanuelSpence]

Hello

I am a newbie to LDK 20 programming and I found handset programming confusing and hard.

Do a google search and obtain LDK PCADmin software and use either a serial rs232 to usb cable or fit a LANU port to your LDK system


Then you can program everything on screen - really easy

Then the noce chaps in this forum are really helpful on the tricky bits - had lots of those and more to come !

John

 

[doktor]

You can try this:

I guess that you dial any digit, except 07, to access the BRI.

PGM 221 + 001 + BTN_1 + 2 + Hold/Save (Type = CO Line)
BTN_2 + 1 + Hold/Save (Cifre 1 )
BTN_3 + 000000 + Hold/Save
(Use DMT tabel 00)

PGM 221 + 002 + BTN_1 + 2 + Hold/Save (Type = CO Line)
BTN_2 + 2 + Hold/Save (Cifre 2 )
BTN_3 + 000000 + Hold/Save
(Use DMT tabel 00)

PGM 221 + 003 + BTN_1 + 2 + Hold/Save (Type = CO Line)
BTN_2 + 3 + Hold/Save (Cifre 3 )
BTN_3 + 000000 + Hold/Save
(Use DMT tabel 00)

PGM 221 + 004 + BTN_1 + 2 + Hold/Save (Type = CO Line)
BTN_2 + 4 + Hold/Save (Cifre 4 )
BTN_3 + 000000 + Hold/Save
(Use DMT tabel 00)

PGM 221 + 005 + BTN_1 + 2 + Hold/Save (Type = CO Line)
BTN_2 + 5 + Hold/Save (Cifre 5 )
BTN_3 + 000000 + Hold/Save
(Use DMT tabel 00)

PGM 221 + 006 + BTN_1 + 2 + Hold/Save (Type = CO Line)
BTN_2 + 6 + Hold/Save (Cifre 6 )
BTN_3 + 000000 + Hold/Save
(Use DMT tabel 00)

PGM 221 + 007 + BTN_1 + 2 + Hold/Save (Type = CO Line)
BTN_2 + 7 + Hold/Save (Cifre 7 )
BTN_3 + 000000 + Hold/Save
(Use DMT tabel 00)

PGM 221 + 008 + BTN_1 + 2 + Hold/Save (Type = CO Line)
BTN_2 + 8 + Hold/Save (Cifre 8 )
BTN_3 + 000000 + Hold/Save
(Use DMT tabel 00)

PGM 221 + 009 + BTN_1 + 2 + Hold/Save (Type = CO Line)
BTN_2 + 9 + Hold/Save (Cifre 9 )
BTN_3 + 000000 + Hold/Save
(Use DMT tabel 00)

PGM 221 + 010 + BTN_1 + 2 + Hold/Save (Type = CO Line)
BTN_2 + 00 + Hold/Save (Cifre 00 )
BTN_3 + 000000 + Hold/Save
(Use DMT tabel 00)

PGM 221 + 011 + BTN_1 + 2 + Hold/Save (Type = CO Line)
BTN_2 + 01 + Hold/Save (Cifre 01 )
BTN_3 + 000000 + Hold/Save
(Use DMT tabel 00)

PGM 221 + 010 + BTN_1 + 2 + Hold/Save (Type = CO Line)
BTN_2 + 02 + Hold/Save (Cifre 02 )
BTN_3 + 000000 + Hold/Save
(Use DMT tabel 00)

PGM 221 + 012 + BTN_1 + 2 + Hold/Save (Type = CO Line)
BTN_2 + 03 + Hold/Save (Cifre 03 )
BTN_3 + 000000 + Hold/Save
(Use DMT tabel 00)

PGM 221 + 013 + BTN_1 + 2 + Hold/Save (Type = CO Line)
BTN_2 + 04 + Hold/Save (Cifre 04 )
BTN_3 + 000000 + Hold/Save
(Use DMT tabel 00)

PGM 221 + 014 + BTN_1 + 2 + Hold/Save (Type = CO Line)
BTN_2 + 05 + Hold/Save (Cifre 05 )
BTN_3 + 000000 + Hold/Save
(Use DMT tabel 00)

PGM 221 + 015 + BTN_1 + 2 + Hold/Save (Type = CO Line)
BTN_2 + 06 + Hold/Save (Cifre 06 )
BTN_3 + 000000 + Hold/Save
(Use DMT tabel 00)

PGM 221 + 016 + BTN_1 + 2 + Hold/Save (Type = CO Line)
BTN_2 + 07 + Hold/Save (Cifre 07 )
BTN_3 + 010101 + Hold/Save
(Use DMT tabel 01)!!!!!!!!!!!!!!!!!

PGM 221 + 017 + BTN_1 + 2 + Hold/Save (Type = CO Line)
BTN_2 + 08 + Hold/Save (Cifre 08 )
BTN_3 + 000000 + Hold/Save
(Use DMT tabel 00)

PGM 221 + 018 + BTN_1 + 2 + Hold/Save (Type = CO Line)
BTN_2 + 09 + Hold/Save (Cifre 09 )
BTN_3 + 000000 + Hold/Save
(Use DMT tabel 00)

PGM 222 + 00 + BTN_5 + 01 + Hold/Save (CO group 1)
PGM 222 + 01 + BTN_5 + 08 + Hold/Save (CO group 8)

PGM 220 + BTN_1 + 6 (or 5) + Hold/Save.

The programming is done so that all CO calls beginning with 1 to 9 (after prefix) is ent to COG=1.
Same with CO calls containing 00 to 06 and 08 and 09.
Only 07 calls are snt to COG=8.

Check if it works!
I did it with keyset admin...



///doktor

 

[doktor]

@EmanuelSpence - welcome to call-in again...

///doktor

 

[doktor]

To overflow to COG=1, if COG=8 is busy;

PGM 222 + 01 + BTN_6 + 00 + Hold/Save (CO group 1)


///doktor

 

[doktor]

Thanx..

///doktor