Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

LG - GDK 100 DTMF

Status
Not open for further replies.

JJ999

Technical User
Jun 18, 2009
25
GB
Hi All LG Engineers & Techie's...

Can I send DTMF to line on incoming isdn calls using digital handsets in any way. As it does not at present.[poke]
( Am I missing a programming command out / I guess this may be a security issue? )

System = DOS-100 SYSTEM Version C.2Gm

NB If incoming call is received on analogue trunk, DTMF "can" be sent to line.
or, if incoming call is still on isdn but analogue extension is used , DTMF "can" be sent to line
 
I don´t know GDK but in LIK you have to set in the System Attributes
"Incoming Toll check=ON". Maybe you can find this command in GDK...
 
Your system will need a DTRU board to send DTMF tones fro any hand set on system
 
It does as per:-
maint> b 8
SLOT : 8
Board Type : MISB
MISB : DTMF Rcvr: 6/n/r
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top