Legend R7 – 2nd PRI setup pool 8

[Textron68]

Have a Legend R7, working for years with a single PRI from LEC. We are adding a 2nd PRI from our Cisco Router for Intra-Company calls. The PRI is programmed and works on inbound calls. Having trouble on outbound calls. I have the channels set up in pool 8 and phones have pool access 8 assigned. They are able to dial 8 + digits, after a brief pause they get system wave off. Looking at the history in Monitor it has verbiage along the lines of ‘carrier disconnect’. The Cisco gurus say they don’t see anything from the Legend attempting to access channels. I’m about half way through a system Print All, so I’ll be able to cut and paste some info as needed a bit later. Also interested in Monitor what direction to take to see live data on the PRI and if it gives Q931 cause codes.

 

[Telecomboy]

HOw do they have the PRI set-up on their end? Is it set to NI2 (National)? Legend won't work properly using NI2.

 

[Textron68]

That was their orriginal config, but we've had them change it to PRI 4ESS - B8ZS - ESF.

 

[SYQUEST]

You should consult the Legend/Magix Network Reference guide. It covers all thing network for those switches. With the proper Dial Plan and configuration, you should not need any "8" access code, just call the station number...

....JIM....

 

[Textron68]

The location is on 4-digit dial plan. The Intra-company dial plan is 7 digit (3-digit location + 4-digit extension). The standard dialing from the PBX sites is dial 9 for local/long distance calls and dial 8 for intra-company calls. That is the standard we are implamenting. We have more than 13000 end-points across 70+ locations, can't do that with just 4-digits. So, to access the new Cisco PRI Pool is dial 8+7-digits.

 

[Textron68]

Here are the highlights from the system. Slot 4 PRI is LEC and works fine... Slot 7 is to Cisco and we are able to pass calls to the system to extensions, but unable to call from extension out to the Cisco.

A System : Mode
A : Hybrid/PBX

A Slot # 0: CKE4 CPU
A Slot # 1: 408 GLM-U
A Slot # 2: 408 GLM-U
A Slot # 3: 408 GLM-U
A Slot # 4: 100D-U
A Slot # 5: 012
A Slot # 6: 016 TRR
A Slot # 7: 100D-U

A DIAL PLAN FOR POOLS
A POOL # 1: 70
A POOL # 2: 8

A 613 4/ 1 No Remote 70 Yes Long 4
A 614 4/ 2 No Remote 70 Yes Long 4
A 615 4/ 3 No Remote 70 Yes Long 4
A 616 4/ 4 No Remote 70 Yes Long 4
A 617 4/ 5 No Remote 70 Yes Long 4
A 618 4/ 6 No Remote 70 Yes Long 4
A 619 4/ 7 No Remote 70 Yes Long 4
A 620 4/ 8 No Remote 70 Yes Long 4
A 621 4/ 9 No Remote 70 Yes Long 4
A 622 4/10 No Remote 70 Yes Long 4
A 623 4/11 No Remote 70 Yes Long 4
A 624 4/12 No Remote 70 Yes Long 4
A 625 4/13 No Remote 70 Yes Long 4
A 626 4/14 No Remote 70 Yes Long 4
A 627 4/15 No Remote 70 Yes Long 4
A 628 4/16 No Remote 70 Yes Long 4
A 629 4/17 No Remote 70 Yes Long 4
A 630 4/18 No Remote 70 Yes Long 4
A 631 4/19 No Remote 70 Yes Long 4
A 632 4/20 No Remote 70 Yes Long 4
A 633 4/21 No Remote 70 Yes Long 4
A 634 4/22 No Remote 70 Yes Long 4
A 635 4/23 No Remote 70 Yes Long 4
A 636 4/24 No Remote Yes Long 4
A 637 7/ 1 No Remote 8 Yes Long 4
A 638 7/ 2 No Remote 8 Yes Long 4
A 639 7/ 3 No Remote 8 Yes Long 4
A 640 7/ 4 No Remote 8 Yes Long 4
A 641 7/ 5 No Remote 8 Yes Long 4
A 642 7/ 6 No Remote 8 Yes Long 4
A 643 7/ 7 No Remote 8 Yes Long 4
A 644 7/ 8 No Remote 8 Yes Long 4
A 645 7/ 9 No Remote 8 Yes Long 4
A 646 7/10 No Remote 8 Yes Long 4
A 647 7/11 No Remote 8 Yes Long 4
A 648 7/12 No Remote 8 Yes Long 4
A 649 7/13 No Remote 8 Yes Long 4
A 650 7/14 No Remote 8 Yes Long 4
A 651 7/15 No Remote 8 Yes Long 4
A 652 7/16 No Remote 8 Yes Long 4
A 653 7/17 No Remote 8 Yes Long 4
A 654 7/18 No Remote 8 Yes Long 4
A 655 7/19 No Remote 8 Yes Long 4
A 656 7/20 No Remote 8 Yes Long 4
A 657 7/21 No Remote 8 Yes Long 4
A 658 7/22 No Remote 8 Yes Long 4
A 659 7/23 No Remote 8 Yes Long 4
A 660 7/24 No Remote Yes Long 4

A Slot Type Format Supp Signal LineComp
A 4 PRI ESF B8ZS DMI-MOS 1
A 7 PRI ESF B8ZS DMI-MOS 1

A BchnlGrp#: Slot: TestTelNum: NtwkServ: Incoming Routing:
A 1 4 CallbyCall By Dial Plan

A BchnlGrp#: Slot: TestTelNum: NtwkServ: Incoming Routing:
A 2 7 CallbyCall By Dial Plan

 

[jschreiner]

Did you ever get this working?