Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Learn something new everyday... 5

Status
Not open for further replies.

Mike Gagnon

Programmer
Apr 6, 2002
8,067
0
36
CA
Here is what seems to be an undocumented little trick to find out the settings in the options of VFP.

> VFP, go into Tools/Options, hold down Shift, click OK button, entire
> settings dumpted to Command Window!


P.S. And this worked all the way back to VFP5.0!



Mike Gagnon

If you want to get the best response to a question, please check out FAQ184-2483 first.
 
Very Nice! Star.

Slighthaze = NULL
[sub]craig1442@mchsi.com[/sub][sup]
"Whom computers would destroy, they must first drive mad." - Anon​
[/sup]
 
Blooming clever!



Regards

Griff
Keep [Smile]ing
 
Curiosity star
 
Mike

Another star, but since no ones asked, how did you find it!!

Lee

Alone we can do so little, together we can do so much
 
keepingbusy

As you may have noticed the tip is in quotation, meaning that I'm quoting someone else, and this was seen on a French FoxPro newsgroup, and the author was anonymous, so...

Mike Gagnon

If you want to get the best response to a question, please check out FAQ184-2483 first.
 
Hi Mike

All the same, if you didn't post it, we would have never known (Thanks again)

Lee

Alone we can do so little, together we can do so much
 
Original TT credit should really go to Eguy in thread184-328134

Brian
 
Wow!
And this gem has been out there all this time?
Stars to both, to Eguy and to Mike Gagnon. Thanks.
Stella
 
Given the reception, either Eguy or Mike should probably make this a FAQ.

Brian
 
Brian

Given the reception, either Eguy or Mike should probably make this a FAQ.

I agree, I'll let Eguy do the honnors.


Mike Gagnon

If you want to get the best response to a question, please check out FAQ184-2483 first.
 
Actually, that tip has been mentioned here times before, including

I think this demonstrates how important it is for us to take a little time and write an faq when we see something cool. I know we don't want to flood our faq section with junk, so it is a judgement call on whether you think it is valuable.

In this case - the prior posts were 3 years ago and you can hardly fault anyone for not remembering them or finding them.





Jim Osieczonek
Delta Business Group, LLC
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top