ldk24 v1.lf and ldk 7024 phones

[abl2910]

Hello Doctor
Do this work
ldk24 v1.lf and ldk 7024 phones or should it be ldk30
;-)
abl2910

 

[Chamvari]

No it does not. Ldp 7024 works from version 3.0 and above. As far as i understand the 1.1 version nexer or ldk24 cannot be upgraded to version 3 without hardware changes. Your only choice s the LKD series terminals not LDP

Dial Tone shoul be There

 

[doktor]

Hi abl

No, it will not work as Chamvari writes.
The best thing is to use LDK-24 in version 3.7 that can use both types LKD and LDP.

///doktor

 

[doktor]

You can easily find some LKD-30 or LKD-8 phones at this site:

http://www.dba.dk

Just search for "omstillingsanlæg" or "telefonsystem".


///doktor

 

[abl2910]

Hello
Thanks, i have some problems with this
it's reset the lg24, when there is some trafik on the lg24
so i will change ldk 7024 to ldk30

Abl2910

 

[doktor]

LDP-7024 should not work at all with LDK-24 version 1.0...

///doktor

 

[abl2910]

Hello
Yes i know now, i was mis inform.
they don't have 7024. but they have the problem
with restart when it is busy.


abl2910

 

[doktor]

Is the LDK-24 well filled up with extensions??
Maybe the LDK-24's pwer suppy is overloaded, or defective?
Let me know your comments.

///doktor

 

[abl2910]

Hello
There is bfb, dsib, dtib, 2xbrib2 and vmib
max.
10 system
6 analog
4 isdn

They have
2 analog, 7 system app. and 3 isdn
and the fault is only in busy cuing on a group

abl2910

 

[doktor]

Sounds strange.
Are all keysets of the type : LKD-30 or are some LKD-8?
Is it a ring group?
Are all 7 keysets members of the ring group.

If so, I would split it up in 2 ring groups with overflow from one ring group to the next ring group.
split the members so, that ½ are members in each group.

///doktor