Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

LDK20 VOIM /VOIBE setup 1

Status
Not open for further replies.

2311angel

Technical User
Aug 17, 2014
161
AU
Hello!

I can't work out how to get this VOIM/VOIBE module working for SIP trunking. I was told it can do it, but I am REALLY hoping I don't need the VOIU card, because that thing is outrageously expensive.

I am attaching a copy of the Database in the hope someone can help me configure it, or find something that I looked over. There is no password on the DB.

I also can't seem to be able to upgrade the firmware from 1.0 Ac to 1.1 . The connection will reset when trying to upgrade in Chrome or IE.



Thanks!
 
 http://files.engineering.com/getfile.aspx?folder=0fc5decc-1a67-480c-938d-7e70fb7e6932&file=DB2.USR
HI Ryan

Good to see you got it all working, now if i was you, I would change the Sip password as it is saved in the download you have put on here.

Mark
 
Thanks - I hadn't thought of that. I have changed the SIP account, so it uses another one - that SIP account no longer exists :)

One thing you might know?
I have the landline connected to my system in CO Grp 2, COL 04. This works OK, but it takes 3 rings before the system passes the ringing signal to the ring assigned phones.
The only station with a delay on it is 212, with a delay of 3.

Can I adjust a setting somewhere to make the system start ringing as soon as the line is ringing?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top