LDK ADMIN

[goldrake]

Hi i would like to use pcadmin first time to save my site config.
I only want be sure a dont make error.
1) install pc admin
2) login Admin pass 0000 then new site and save
3) Get Information (From current connected site)

but
1) if i use an usb to serial adaptor to connect.
the rs232 cable between serial adaptor must be female/female but cross or not cross?
2) I need to set com port in 19200 ?
3) I must set my location (italy) in pcadmin or pcadmin save all data
There are some tip ?

 

[doktor]

To obtain any software for the ipLDK systems or the related PC software, you need to contact your local LG-Nortel dealer, distributor or importer.
Best regards
///doktor

 

[morenot]

Check this link:

http://www.lg-nortel.es/lgnortel/areatecnica/softwareldkipldk/index.html

Colud be helpful

 

[doktor]

It seems to have all the needed s/w for this case...
///doktor

 

[goldrake]

Hi morenot,

thank for the link is very beatiful

Hi doktor you tell " It seems to have all the needed s/w for this case..."
but i don' found ldkadmin on/off that match my versions.
Can i use 3.8 ? but is not ugual. Help
C.8 = 3.8 ??

 

[doktor]

Yes. C=3. Letters like "C" means "test software"...
///doktor

 

[goldrake]

Hi doktor,(i think you are a professor!)
so if a download pcadmin online c8ai i can download my 37ce e 37dh usr file?
Today i ask my vendor and he tell me than admin 37ah is ok for my situation, but i think you know better ipldk then him.

 

[doktor]

Hi Goldrake

Maybe you're right!
I prefer only to be doktor, not a professor.
If your ipLDK system runs 3.7 xx, I would recommend that you use LDK PC ADMIN version 3.7xx and the same (3.7 xx) fo rthe offline program. Many new fcilities have been included in s/w version 3.8 xx, so you should wait with the "3.8" untill you can have the 2 PC programs in version 3.8.


///doktor