Apr 12, 2010 #1 Dishmega MIS Jan 28, 2005 34 US Is there a default ip address on the LANB module and default admin password on this system ? if not how can we know the current ip address ? Thanks in advance
Is there a default ip address on the LANB module and default admin password on this system ? if not how can we know the current ip address ? Thanks in advance
Apr 12, 2010 Thread starter #2 Dishmega MIS Jan 28, 2005 34 US Dont worry about this question I already find out how to read the ip. But I have another question, Can you use the ethernet port on the VOIP Card to manage the LDK-300 with ldk pcadmin? Upvote 0 Downvote
Dont worry about this question I already find out how to read the ip. But I have another question, Can you use the ethernet port on the VOIP Card to manage the LDK-300 with ldk pcadmin?
Apr 12, 2010 #3 doktor IS-IT--Management Dec 3, 2003 3,841 DK No, you need the LANU. VOIB/VOIBE is onlt for IP phones and IP trunks. ///doktor Upvote 0 Downvote
Apr 12, 2010 Thread starter #4 Dishmega MIS Jan 28, 2005 34 US Yup I setup the IP on this card to 192.168.0.10 and I can't event ping the interfase from a laptop on 192.168.0.20 Upvote 0 Downvote
Yup I setup the IP on this card to 192.168.0.10 and I can't event ping the interfase from a laptop on 192.168.0.20
Apr 12, 2010 #5 doktor IS-IT--Management Dec 3, 2003 3,841 DK Check your default gateway and the subnet mask... ///doktor Upvote 0 Downvote
Apr 12, 2010 #6 Odycon ISP Mar 1, 2009 9 GB Also, if you have changed the ip address, you will have to reset the system before it is active Upvote 0 Downvote
Apr 13, 2010 Thread starter #7 Dishmega MIS Jan 28, 2005 34 US Thanks a lot, now that I reset the unit I can ping the interfase. Upvote 0 Downvote
Apr 13, 2010 #8 doktor IS-IT--Management Dec 3, 2003 3,841 DK Thanks for your status update. ///doktor Upvote 0 Downvote