Hello~
I have just gotten a new LDK system and am having trouble with external paging.
On the previous system, which was an IP-LDK 20 (A), the paging worked fine, it was nice and clear and loud too. On my new system, (which is a LDK-20 D system) the paging is awful. It's tinny sounding and the person paging sounds far away.
The wiring for the paging is as follows
MJ4 on KSU (pins 5/6) ---> Line Isolation Unit --> [RJ12 to 3.5mm phono cable] --> Amplifier.
This previous setup worked fine on the old system, and still does for the old system, but not on the new one.
Any help would be greatly appreciated.
MBUB software: AU66P-C.9Ec DEC / 10
AUSTRALIA
2311angel
I have just gotten a new LDK system and am having trouble with external paging.
On the previous system, which was an IP-LDK 20 (A), the paging worked fine, it was nice and clear and loud too. On my new system, (which is a LDK-20 D system) the paging is awful. It's tinny sounding and the person paging sounds far away.
The wiring for the paging is as follows
MJ4 on KSU (pins 5/6) ---> Line Isolation Unit --> [RJ12 to 3.5mm phono cable] --> Amplifier.
This previous setup worked fine on the old system, and still does for the old system, but not on the new one.
Any help would be greatly appreciated.
MBUB software: AU66P-C.9Ec DEC / 10
AUSTRALIA
2311angel