LD43 BKO VS. LD143 Option 3, Option 2

[Telco01]

Is there a difference between LD43 BKO and LD143 option 3, option 2?

 

[allenmac]

One difference is that LD 43 BKO is available from any TTY port. LD 143 opt 3,2 is only available from TTY 0.

 

[eleung333]

Are you talking about Opption 11C?

 

[eleung333]

For Option 11C,
Using BKO in LD43, the database will saved in PC-card slot B
Using Option 3 then 2 in LD143, the daabase will saved in PC-card Slot A

 

[Telco01]

Yes, I am speaking of an Opt.11
So there is no difference other than the card slot. I leave a card in slot B of all my Opt.11's and do BKO whenever I make changes, be it remote or local.

Thanx for the replies.

 

[FonePhreak]

Check out Nortel manual 553-3011-500 (Sept. 2004), Small System Maintenance, pages 19-38. It goes into some detail about LD 43 and LD 143, both backing up and restoring.

Carl.

 

[eleung333]

No, there are different

1. the backup database using by LD43 & LD143 will have different procedures to restore, follow FonePhreak advise to read the NTP
2. when using BKO in LD43, the database will overwrite existing last backup database
3. when using achieve database in LD143, you can save it on difference folder, which means you can have more than one database backup on same PC-card.

Eddie