LD 96 STAT DCH

[Beauty1982]

Hi Folks!

I was checking my D-chennels and in LD 96 appears the next:

.STAT DCH
DCH 010 : OPER RLS DES :IPTRUNK
DCH 015 : OPER EST ACTV AUTO DES :ITAUCEIC
DCH 093 : OPER EST ACTV AUTO DES :SSVTRK

but I have a concern my DCH 10 has a RLS status.

What does it mean?

Can somebody help me? What can I do to change it to an active status?

Here I post additional information, if required.

TYPE adan dch
ADAN DCH 10
CTYP MSDL
GRP 2
DNUM 10
PORT 0
DES IPTRUNK
USR ISLD
ISLM 64
OTBF 32
BPS 64000
PARM RS422 DTE
CLOK EXT
NASA NO
IFC SL1
SIDE USR
CNEG 1
RLS ID 25
RCAP ND2
MBGA NO
OVLR NO
OVLS NO
T200 3
T203 10
N200 3
N201 260
K 7

Thanks a lot in advance.

 

[9201]

D-channel 10 is your IP Trunks tie to another site..if you have IP trunking between building yes its a concern.

 

[Johnthephoneguy]

You can try to disable the dchannel in 96 dis dch 10
then go to ld 60 and find the loop that dchannel is attached to.

in ld 60 disl x (x being your loop number)
then enll x (same number)

you might get lucky and bouncing it is all that is needed.

JohnThePhoneGuy

"If I can't fix it, it's not broke!

 

[Beauty1982]

Ok, I'll try to fixed it in that way. but What does RLS mean? RLS = Release? when my D-Channel is in this status means that is disable?

 

[rpneal44]

You are correct. REL=release. No it's not disabled, it's just down (not working)

Phil, the Phriendly Phone Man

 

[Beauty1982]

Thanks a lot guys, I really appreciate your support.

I'll give you a star, all of you.

Regards