terrysdavid
Programmer
Anyone ever tried to print out all their i2002 or i2004 sets in ld 81. It works for the 3904's and 500 sets. The documentation says that it should accept 2002 and 2004 but it's not accepting it. Any ideas?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
LD 81 LST 1
- Thread starter terrysdavid
- Start date
- Status
acewarlock
Technical User
What are you trying to get, the TN?
This is a Signature and not part of the answer, it appears on every reply.
This is an Analogy so don't take it personally as some have.
Why change the engine if all you need is to change the spark plugs.
This is a Signature and not part of the answer, it appears on every reply.
This is an Analogy so don't take it personally as some have.
Why change the engine if all you need is to change the spark plugs.
- Thread starter
- #3
terrysdavid
Programmer
No. I'm just trying to get a list of all the IP phones programmed on the system. I don't want it in the format I get in ld 11
acewarlock
Technical User
Do you just want a count of how many you have?
LD 80
CNT
SETS
This is a Signature and not part of the answer, it appears on every reply.
This is an Analogy so don't take it personally as some have.
Why change the engine if all you need is to change the spark plugs.
LD 80
CNT
SETS
This is a Signature and not part of the answer, it appears on every reply.
This is an Analogy so don't take it personally as some have.
Why change the engine if all you need is to change the spark plugs.
bigindian65
Technical User
you can prt dnip in 117 and go thru ranges
prt dnip 2
prt dnip 3
etc, gives dn/tn/ip but not tnb printout in entirerty
Mato' Was'aka
prt dnip 2
prt dnip 3
etc, gives dn/tn/ip but not tnb printout in entirerty
Mato' Was'aka
- Thread starter
- #6
terrysdavid
Programmer
bigindian65. I tried it but it's not exactly what I'm looking for.
In ld 81 if I do the following :
req lst
cust 0
date
page
des
feat 3900 <------------
I'm able to print a list of all the 3904's programmed in the system.
The documentation indicates that I should be able to do the same if I use 2002 or 2004.
The reason why I want this is that I've printed all the IP phones registered to my signalling server. When I checked the number of phones actually programmed in the system using the slt command in ld 22, it seems that I have a lot of phones programmed but not physically present. So I'm trying to reclaim some of my IP licenses.
In ld 81 if I do the following :
req lst
cust 0
date
page
des
feat 3900 <------------
I'm able to print a list of all the 3904's programmed in the system.
The documentation indicates that I should be able to do the same if I use 2002 or 2004.
The reason why I want this is that I've printed all the IP phones registered to my signalling server. When I checked the number of phones actually programmed in the system using the slt command in ld 22, it seems that I have a lot of phones programmed but not physically present. So I'm trying to reclaim some of my IP licenses.
acewarlock
Technical User
req lst
cust 0
date
page
des
feat SETS
This is a Signature and not part of the answer, it appears on every reply.
This is an Analogy so don't take it personally as some have.
Why change the engine if all you need is to change the spark plugs.
cust 0
date
page
des
feat SETS
This is a Signature and not part of the answer, it appears on every reply.
This is an Analogy so don't take it personally as some have.
Why change the engine if all you need is to change the spark plugs.
-
1
- #8
LeeMcCauslin
MIS
nevermind - that didn't work for me - i must be misunderstanding the NTP - it clearly says i2004 is a valid response but maybe it's to the wrong prompt...
- Thread starter
- #11
terrysdavid
Programmer
Thank you glynnmsg. That is exactly what I was looking for. It seems like the NTP is wrong.
- Status
Similar threads
