LD 80 TALKSLOT TRANSLATION / 1 way audio

[tikimon]

I am having trouble with one way audio and by using ld 80 trac l s c u dev comand have been able to narrow problem down to "TALKSLOT ORIG 30". Could anyone tell me what this is pointng to? Here is whole trace:

.trac 20 0 5 5 dev

TN 020 0 05 05
KEY 0 SCR MARP ACTIVE TN 020 0 05 05
ORIG 020 0 05 05 0 SCR MARP 0 7198 3904
TERM 224 0 00 00 V PHYSICAL TN 000 0 SCR MARP 0 7722 I2004
DIAL DN 7722
MAIN_PM ESTD
TALKSLOT ORIG 30 TERM 26 JUNCTOR ORIG0 TERM0
EES_DATA:
NONE
QUEU NONE
CALL ID 7000 12766

COS_ORIG UNR COS_TER CTD
TGAR_ORIG 0 TGAR_TER 0
NCOS_ORIG 5 NCOS_TER 4
EXP_ROUTE NO


KEY 1 SCR MARP IDLE
KEY 2 ADL IDLE
KEY 3 ADL IDLE
KEY 4 ADL IDLE
KEY 5 ADL IDLE
KEY 6 ADL IDLE
KEY 7 ADL IDLE
KEY 8 ADL IDLE
KEY 9 ADL IDLE
KEY 10 ADL IDLE
KEY 11 ADL IDLE
KEY 12 NUL IDLE
KEY 13 NUL IDLE
KEY 14 NUL IDLE
KEY 15 NUL IDLE
KEY 16 MWK IDLE
KEY 17 TRN IDLE
KEY 18 AO6 IDLE
KEY 19 CFW IDLE
KEY 20 RGA IDLE
KEY 21 PRK IDLE
KEY 22 RNP IDLE
KEY 23 NUL IDLE
KEY 24 PRS IDLE
KEY 25 CHG IDLE
KEY 26 CPN IDLE
KEY 27 CLT IDLE
KEY 28 RLT IDLE
KEY 29 NUL IDLE
KEY 30 NUL IDLE
KEY 31 NUL IDLE


.

 

[johnpoole]

i'm thinking you may have a bad cni, i would scpu's and try to duplicate the problem... the trace shows a lot of data but not a card id...

john poole
bellsouth business
columbia,sc

 

[tikimon]

I was finally able to swap cpu's and one way audio stiil exsists when I hit talkslot 30 from loop 20 0. Any other ideas? I was thinking 3PE card but I have to schedule down time for that.

 

[Reusser]

is problem only between TDM connections and IP phones?

 

[tikimon]

The one-way audio is not just IP phones, I had it happen on internal, tie, and pri calls

 

[johnpoole]

replace the controller on that loop and the controller... scpu says it is not the cni or the cpu...

john poole
bellsouth business
columbia,sc