LD 2 Traffic Measurments 1

[luckyoldsun]

Are there any dummies guides to deciphering these reports?

Thanks,
Chris

 

[bigindian65]

look @ ld 2 in ld 2 and there is NTP Traffic Measuements


Mato' Was'aka

 

[GHTROUT]

I have a few of them "ciphered" on a spreadsheet here:

http://www.ghtrout.com/files/

Specifically, this file:

http://www.ghtrout.com/ghtrout/files/tfc001-2-3-4.zip

GHTROUT.com | FAQs | Recent Replies

 

[luckyoldsun]

I've never been so confused. Here's what I need to know.

We have 2 PRI's. 46 channels total. 23 are in, 23 are out. If all are full they will roll to each other. I need to know the max channel usage per hour. Is this possible and easy to configure?

Thanks,
Chris

 

[GHTROUT]

>LD 2

.SOPC 0 1

.SSHC 0 1 1 31 12
7 17 2
2 3 4 5 6
.
Now, guestimate the busiest hour of the day. The once per hour for the periods one hour before and one hour after your guestimate, log in and do this:

LD 2
.INVC 0 2

And then use my spreadsheet to decipher TFC002

GHTROUT.com | FAQs | Recent Replies

 

[GHTROUT]

Ooops, change my last post to this

>LD 2

.SOPC 0 2 (this needs to be 2, not 1)

.SSHC 0 1 1 31 12
7 17 2
2 3 4 5 6
.
Now, guestimate the busiest hour of the day. The once per hour for the periods one hour before and one hour after your guestimate, log in and do this:

LD 2
.INVC 0 2

And then use my spreadsheet to decipher TFC002

GHTROUT.com | FAQs | Recent Replies

 

[GHTROUT]

And of course, I hosed it again...

.SSHC 0 1 1 31 12
7 17 1 (that should be 1, not 2)
2 3 4 5 6

GHTROUT.com | FAQs | Recent Replies