LCR ON BP 250

[bogzphil]

hi guys! can you please help on how to program LCR on BP 250?

Thank you..

 

[nerdherder27]

is not very immediate configuration
see the attachment and good luck

http://www.mediafire.com/?blzuu9vbd9rng10

 

[bogzphil]

i followed the command in your attachment but i get number blocked when i dial lcr directory number plus the number i wish to call.

 

[bogzphil]

do anyone have a copy of a bms file with lcr? can i have a copy please for reference..

thank you.

 

[nerdherder27]

I have attached a configuration operating at 100% of my existing customer
I hope that will be of help

 

[bogzphil]

nerdherder27,

im using LCR directory number and in my trunks LCR analysis is unchecked. in your configuration you dont have an LCR directory so your access code is your trunk route? Do you have any idea in configuring LCR if i use LCR directory number?



Thanks...

 

[nerdherder27]

Sorry I've never configured with the LCR directory number, because I had not ever need.
have you tried setting it up as my example? does it work? why do you need LCR directory number?

 

[bogzphil]

nerdherder27,


your example is working but im trying to configure an LCR with only one access code that's why i'm using LCR directory number. is this even possible?