Once I convert my layers to tables, the newly created tables will sort of move from their original position. The layers were flush with both the top and the left sides of the browser, but upon being converted to tables, they move both down and to the right. Anyway I can make the tables flush with the top and left sides?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Layers to Tables (alignment) 1
- Thread starter osiris031
- Start date
Did you mke sure the choices selected in the box that comes up when you convert layers to tables are what you want? Like the collapse less than, or the center on page, snap to grid, these options can shift things around so they work for more peoples set-ups (screen size and resolution). But if you really want to lock things down check the most accurate box.
-
1
- #3
spacemonkey
Technical User
go modify> page properties and set the left margin and top margin to 0. this will make the talbes flush with the top and left.
- Status
Similar threads
