Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Launch game, have sound, monitor blank!

Status
Not open for further replies.

cougarxr7

Technical User
Nov 13, 2003
11
US
This is a new computer, old monitor.
PC Chips M906HNU;
SPECIFICATION

Processor
One Socket 478 supports
· Support Intel Pentium 4 series CPU with Hyper Threading Technology
· Support 800/533/400 MHz FSB

Chipset
Intel 845E chipset with following features:
· Intel 82845E Memory Control Hub and
Intel 82801DB I/O Controller Hub.
· One AGP slot supports 4X AGP Card
· Audio - AC '97 2.2 Codec
· LAN – 10/100BaseT LAN onboard

System BIOS

· AMI 2Mb Flash Rom
· Supports Plug and Play 1.0A, APM 1.2, Multi Boot, DMI
· Support ACPI revision 1.0 specification

Memory

2 DDR DIMM Sockets
· Two 184-pin DIMM slots for DDR with
200/266MHz Bus, supports 333/400MHz
conditional when using 800MHz FSB CPU
· Maximum: 2GB

Modem

· Optional 56K V.90 CNR Modem

Expansion Slots

· 1 AGP (4X), 4 PCI slots,1 CNR slot

Form Factor & Layers

· Full Size ATX
I/O Interface

Back Panel I/O Ports
· PS/2 keyboard and mouse connectors
· Four USB2.0 Ports
· One LAN Port (optional)
· One parallel port
· One serial port
· Audio ports (Mic, Audio-in, Audio-out)
**************************************************
The monitor is old;Hitachi SuperScan 15S
Aamazing CM8428MX Specifications
Screen Attributes
14"
13 viewable image
.28 mm dot pitch
Input Signal
Video Signal : Analog
H Frequency : 32-48 Khz
V Frequency : 50-90 Hz
Sync Signal : Separate

Video Bandwidth
65 Mhz
Input Connector
Captive HD-15

Maximum Resolution
Maximum : Up to 1024x768, 60 Hz
Macintosh :
Flicker free :

Power Use
Power Supply : 90 watts
Consumption :
Compatibility
Mac Adapter : Mac PnP; II Series
PC Adapter :

User Controls
Analog controls
BR, CT, VE, VS, HZ, HS
Plug and Play
************************
I'm using Xp Pro. We have a second computer here its around 4 or 5 years old, the monitor is 2 years old. I did all kinds of test between these comps! Changed video cards no difference! The game play eveytime except with my system/motherboard and the Hitachi monitor?
Also on reboot the bios says the video card is a Geforce2 64MB, which is right but, in the OS it says its only 32MB?
The OS has this monitor set as a default monitor?
Any help would be great thanks! cougarxr7
 
You have to stop the refresh rate from going over 60hz .
This will not happen when using default monitor driver.
Install a dedicated driver for the monitor.
Or use the refresh override in nvidia driver to
set all display resolutions to 60hz.
 
Thanks got it working ! Took some digging but I got it!
 
Perhaps a new monitor is under the tree for christmas ...

[party]
 
If there is I hope its at lest 19"! Hey Thanks alot!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top