I have a laserjet 3005n that will not come out of sleep mode. If I turn ity off and right back on it will say initiallizing and them stop booting. If I leave it off for abot 15 minutes it will boot back up. As soon as it goes into sleep mode again, it locks up. Any ideas?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Laserjet 3005n will not come out of sllep mode
- Thread starter dfb627
- Start date
Please make sure the printers firmware is up to date -> 02.041.0 - 16 Oct 2008.
It was a "known issue" in the earlier fw versions that the printer would hang and never leave sleepmode when a job was sent to the printer or you tried accessing it from the control panel/EWS.
It was a "known issue" in the earlier fw versions that the printer would hang and never leave sleepmode when a job was sent to the printer or you tried accessing it from the control panel/EWS.
- Thread starter
- #3
- Thread starter
- #5
- Thread starter
- #6
- Status
Similar threads
- Locked
- Question
- Locked
- Question