Landscape printing on RH 8.0

[eanda10]

I set up an laserjet 4100 on my network it was a breeze setting up the printer to print from linux the only issue I am still havin is printing landscape when I enter lp -d prodhp -oland it just ignores the -oland command and prints portrait

btw I am printing to the jetdirect card port 9100
any ideas ?????

thank you

 

[MWillo]

You may want to look at LPRng and IFHP filters to get landscape printing working.

I'm affraid I don't have a definitive howto on this but the following site is quite helpful

http://www.lprng.com/

Hope this helps and good luck, it took me a while to be able to use many of the -o options i knew and loved on Linux