Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Lan1/Lan2

Status
Not open for further replies.

cheikhdtn

Technical User
May 17, 2018
99
DZ

Hi

we have IPO 500v2 LAN1 10.89.29.0 LAN2 192.168.43.0, ext 500 on LAN1, ext 200 LAN2 after testing we hear nothing on the ext 200 side. what is the exact config?
 
I thought it was best to have all extensions on the same LAN.

Go into LAN1, LAN2 and make sure H323 Gateway and SIP registrar are enabled as needed.
 
if you dont have routing between the lans they you will need to switch of direct media path
(if the phones have the IPO as default gateway then routing should be ok)

but as already started it is best practice to have all voice devices (phones & sip trunks) on the same lan whenever possible

Do things on the cheap & it will cost you dear

ACSS
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top