musharraf
Instructor
- Dec 26, 2008
- 9
Hi, which data switch recommended fro CS1000 ELAN/CLAN/IP phone etc... I mean Layer 3 or 2 and some other specification.
Regards
Regards
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
LAN switch for CS1000
- Thread starter musharraf
- Start date
- Status
Either the Nortel 4500 or 5500 series switches will do layer 3 and POE in some models.
You'll get layer 3 functionality with static routing only in the 4500's. 5500's are gigabit and do layer 3 and also support dynamic routing. 4500's come in both gigabit and 100MB flavors.
It all depends on what your needs are, but either of those models should do well.
You'll get layer 3 functionality with static routing only in the 4500's. 5500's are gigabit and do layer 3 and also support dynamic routing. 4500's come in both gigabit and 100MB flavors.
It all depends on what your needs are, but either of those models should do well.
- Thread starter
- #3
tnphoneman
Vendor
Layer 3 is fine but if you are splitting your cores you would need a layer 2 connection between the 2 cpus for the HSP link.
Signature===========================================
Aastra Authorized Reseller
Signature===========================================
Aastra Authorized Reseller
- Status
Similar threads
- Locked
- Question