I am having trouble getting lacp trunking active on all 4 ports between a 5406ZL and 5308XL procurve switches.
the 5406 has ports b1-b4 marked as lacp active
the 5308 have ports b1-b4 marked as lacp passive
I issue the cli command
trunk b1-b4 Trk3 LACP on both switches
my result after the links come up on both ends are that the ports on each side are marked as lacp active and only B! in the tunk group is up with lacp partner as yes and lacp status as success.
no matter what I have tried I can not get more than one port active in the lacp trunk group.
Need helpful thoughts here to get this running.
Thanks in advance.
the 5406 has ports b1-b4 marked as lacp active
the 5308 have ports b1-b4 marked as lacp passive
I issue the cli command
trunk b1-b4 Trk3 LACP on both switches
my result after the links come up on both ends are that the ports on each side are marked as lacp active and only B! in the tunk group is up with lacp partner as yes and lacp status as success.
no matter what I have tried I can not get more than one port active in the lacp trunk group.
Need helpful thoughts here to get this running.
Thanks in advance.