Our application has been printing to Seiko and Dymo/CoStar Label printers via Clipper 5.2 and the Runestone Library. We are now experiencing problems under Win98 and WinMe (no label or part of a label) on high speed machines (e.g., Compaq 933 MHz Pentium, IBM Aptiva with 1 GHz AMD processor). The application pauses (as if trying to print the label) then returns (as if the label was printed). We've verified the correct COM Port and the required settings for the label printer. Suggestions?? Thanks.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Label Printers on COM Port
- Thread starter TOMBUGGY
- Start date
I got the same problem. Sometimes (with ticketprinter via COM1) I could solve the problem by reserving the COM1
Control pannel / System / (right mouse buttom on 'My computer') => reservation sources IRQ & adresses.
However I couldn't find the same possiblility in WINXP
When we use Xbase++ (32 bit platform!!!) no problem at all to print via COM1....
Wim
Control pannel / System / (right mouse buttom on 'My computer') => reservation sources IRQ & adresses.
However I couldn't find the same possiblility in WINXP
When we use Xbase++ (32 bit platform!!!) no problem at all to print via COM1....
Wim
- Status
Similar threads
- Locked
- Question
- Locked
- Helpful tip
- Locked
- Question
- Locked
- Question