Does anybody have information about connecting two Fujitsu F9600 PBX units together via FIPN in a lab setting (not using a CO provided T1 connection). We have two PBX's and would like to set up one as a backup for one of our sites. To do so requires that we load a backup from that site into the switch and configure that PBX with the same circuit boards in the same locations in the shelves. That's not a problem. But we will need to set up a FIPN link between the backup PBX and out main PBX to perform operational status tests. Any information about required cables for such a lab setup, and technical data about setting up timing between adaptor boards and FIPN cards would be helpful. Thanks.
GW North
GW North