Having a problem with labeling new tapes. When labeling completes, the tape does not eject from the drive. The tape has to be manually ejected. Once tapes are labeled everything else seems to work fine. All diags run on the library and drives.
System is configured as follows:
STK L180 code ver.2.36.00
2x SDLT 320 drives code ver.46
adaptec 2944UW controller driver AIC78xx.sys
System is windows 2000 version 5 SP4
Not sure what networker version (but should be latest)
Anyone heard of problems like this with SDLT drives?
Any help or ideas would be great!
System is configured as follows:
STK L180 code ver.2.36.00
2x SDLT 320 drives code ver.46
adaptec 2944UW controller driver AIC78xx.sys
System is windows 2000 version 5 SP4
Not sure what networker version (but should be latest)
Anyone heard of problems like this with SDLT drives?
Any help or ideas would be great!