KXTDE100 / CSIF Card

[mickyg5159]

Hi Guys
I have installed a KXTDE 100 with a CSIF (4 port) I cannot get the system to bring it in to service

It sees the card as the correct card in the slot?

I have tried 2x cards and reset several times and tried different slots.

I says Card Obstacle when I try to bring it in to service.

Any ideas???

Regards
Mike

 

[obtsystems]

Try plugging in a cs to one of the ports before bringing into service
I think it needs one pluged in to get master mac

 

[mickyg5159]

Thanks obtsystems

I have connected a CS it is no different?

Just keeps saying "Card Obstacle"

Any more ideas?

Regards
Mike

 

[obtsystems]

The only reason you will get card Obstacle is
a faulty card
Over limit of extension ports
Firmware
I still have itu. My head the system had to have a cs connected before it would come up. Try powering the system on with it connected
It has to be a KX-TDA0156 cell station. If that does not work check limits and firmware of the card and system

 

[Arvidalex]

maybe system full of extns?
Not the same versions?
Your tried different slots,so it should not be the backplate..
If i remember csif can be hot swapped, so the reset before or after makes no difference in this case.