Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

KX-TDA Account code 1

Status
Not open for further replies.

ramik

Technical User
May 19, 2005
40
JO
I have customer replace his PBX from KX-TD1232 to TDA200
The problem that I can't program Account code in TDA200 like TD1232
in old PBX we program some COS to make international & national calls throw Account code by make this COS verify toll but in TDA200 we don't have this option can any one help me because customer insist to have it the same way that he had it before on TD1232

Regards
Rami
 
They Should have shown you that at the TDA course
Ring your Panasonic Tech Support
 
T he's Jordanian and claims that as far as tech support and traning in Jordon they are on there own!!
 
If I had Panasonic Tech Support I would not bather my self and ask on these forums
 
2.System>>7. COS Settings>> Main

you have COS, then for specific COS put Account code Mode>>forced

That COS in 7.TRS>>Denied Code put restriction with first digits of telephone numbers which you want to restrict.

In table for account codes put for example 4321, go to extension under COS which is forced to dial over account and dial *494321 then 9 for exit then number.

Let somebody correct me if I am wrong

Best regards
 
Or if you have ISDN card and lines, or remote card, or IPGW card, then find the Panasonic company who will administrate/programm/maintain your system remotly, make contract with them.

Account code option in Panasonic system is very easy to implement, but for non technical user could be nightmare
 
Dear Mr. Pujdo011 thanks you for your help
But i think you don’t get what I need.
I can do all of that but the customer ask me to program the EXT. to make local calls any time without account code when the user need to make national or international calls he must inter his account code like we do in KX-TD1232 & KX-TD500 in verify toll the TDA200 we don’t have verify toll option we have forced that’s my problem how we can make user use account code with KX-TDA200 like he was using KX-TD1232

Ps: I am programmer not Technical User and I am familiar with account code & I program it many times before.

Thanks
Rami
 
sounds like the 200 will not do what you are trying to do
if you can not find a solution in the manuals!
 
It will do it. Take you about 10 minutes

Setup toll/code restriction to restrict national and international calls and apply this COS level to all appropriate handsets

Then go to Feature -> Verified Code
Enter in some codes here. Each code can be a max of 4 digits. Enter a PIN for each code. Keep em short if the people using the system aren't too bright and won't remember the digit string; as both verified code and pin are required.

In the same screen, you will see that you can set a class of service for each verified code. Set each code to a COS that is allowed to dial national and international.

To use these, simply dial *47*[verified code]+[pin]+[trunk access code]+[desired number to dial]

 
you can store the code on a one touch Key if that makes it easier to use
 
@ shardian WHat is the purpose account code feature in TDA600, TDA200, TDA100????

I can not use verified code *47, because SMDR output. Verified codes are located in same line where is extension. I want to use account code feature *49, but there is no table for account code codes in system TDA... so TDA...can not recognize codes and alow to dial int numbers or cell phones.

In option for COS Settings there is CO & SMDR >> Account code Mode to choose option or forced. So normaly like on TD500 I was use verify-tall + certian TRS in specific CoS, and without account code users are dialed local calls, with account codes they are dialed everywhere, and in SMDR output in line for account codes there was account codes and my billing software are worked based on that
 
When I press SP-PHONE on KX-T7636 on display was offered option to press account button, ok I was press option for account and system was ask me to enter account code.

So I like to ask Panasonic TDA system departmant where to put account codes in maintenance console??

In next version?? OK I will buy SD card for new version, but they need to make available ASAP!!!!!!

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top