Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
KX-NS700 USB port
- Thread starter Ryder67
- Start date
obtsystems
Programmer
Why would you want to. It has a lan port already
- Thread starter
- #3
Because I have a call accounting system need to use the LAN port as SMDR to pull data. It is stated in the installation manual, it can use a USB to LAN adapter to use the USB port as a maintenance port. I have try using a USB to LAN adapter(3.0) and launch the off-line maintenance console. In the maintenance console i selected USB LAN connection, I key in the port number 33321 but it don't work.Is there a setting that I need to do? Or the port number I have key in is incorrect?
Thanks.
Thanks.
obtsystems
Programmer
you can do that through the on-board LAN port. Panasonic need the software to logon to the system smdr through the LAN.
You could get a USB to serial adapter to connect the PC.
SMDR uses port 2300 by default, port 33321 is a telnet port (never used it myself for anything)
You could get a USB to serial adapter to connect the PC.
SMDR uses port 2300 by default, port 33321 is a telnet port (never used it myself for anything)
- Thread starter
- #5
- Thread starter
- #6
- Status
Similar threads