After activating my firewall on my Kx Hts32 web maintenance console, all ports were blocked, and I am no longer able to access the web maintenance console. Please assist; what can I do? Thank you in advance.
Our Panasonic local tech closed shop during COVID and never reopened. Is there a tool that allows backup without using the Web maintenance console, or to access the pbx directly without the use of IP and TCP ports.
There is no tool but you can get support from any willing Panasonic Tech.
The last option is to reset.
The PBX is accessible through the Operator set if it was permitted during programming while the Web-MC was still accessible.
KX-HTS can block WEB-access via WAN-port, not via LAN-port.
Connect your PC directly to the LAN-port of the PBX, perform necessary network settings (e.g. set the IP-address of your PC to DHCP) and connect to KX-HTS.
@omonat our Reception phone is a KX-HDV130, it have limited functionalities. When we connected to the lan1 port our switch was connected to the internet so on its list of ip Address it was showing the WAN IP of the portal "with filtered ports". When we disconnected everything and connected directly to the lan1 it is not showing the web portal ip Address or any connections.
Thank you all for your assistance. I was able to access the web console and did the following: the default IP range for the HTS32 is 192.168.1.0-255, so I manually configured my IP to this range and ran an IP scanner, which allowed me to locate my HTS32 IP. "On the default LAN, port 80 is always open
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.