Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations John Tel on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

KSU move

Status
Not open for further replies.
pcrequest

pcrequest

MIS
Jul 12, 2007
71
US
We have a Norstar KSU/PRI MICS 5. Handsets are M7310.

Moving our KSU tomorrow. Any tips? Are the settings saved to some kind of flash memory? Or is there a risk of losing our settings by leaving the KSU unpowered? The new plywood is on the wall and ready to go.
 
Sort by date Sort by votes
the system should hold the memory for quite a while
(have seen it hold for more than 6 months)
but would still be a good idea to back it up, just in case the memory capacitors are not up to snuff

HALLOWED ARE THE ORI

mike
 
Upvote 0 Downvote
Thanks. Kept it plugged into the UPS. 2 guys. We carried the old board with everything attached to the new location and didn't need to reattach any components.
 
Upvote 0 Downvote
make sure it's programed for set relocate - "Yes" this should give everyone their proper extention. Unless they have already unplugged their phones.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Wyod_Broh
  • Locked
  • Question
Meridian Norstar KSU
Replies
5
Views
262
Don W
Don W
Kagami
  • Locked
  • Question
8x24 KSU keeps resetting
Replies
3
Views
280
curlycord
curlycord
atcom11
  • Locked
  • Question
T7316 maximum distance from MICS KSU
Replies
8
Views
247
curlycord
curlycord
cpolley1
  • Locked
  • Question
Nortel CICS KSU call forward off site after 3 rings?
Replies
2
Views
215
cpolley1
cpolley1
heathbus
  • Locked
  • Question
Norstar 8x24 KSU phones resync ocasionally
Replies
10
Views
313
curlycord
curlycord

Part and Inventory Search

Sponsor

Back
Top